Rifle Services
Please note that prices listed are for labor only and do not include cost of parts or refinishing if any, unless specified.
| Install Krieger or Criterion Heavy Match Barrel | $145.00 |
| Install Krieger or Criterion Standard or Medium weight Barrel | $105.00 |
| *Barrel installation includes inspection of receiver and bolt, install new barrel and headspace | |
| Square/Crown Barrel & Flash Suppressor- This insures that muzzle and flash suppressor mating surfaces are a perfect fit to eliminate uneven gas release in a critical area | $45.00 |
| Modify Flash Suppressor to NM Spec- Eliminates misalignment problems and allows expanding gas to escape more easily to reduce influence on the bullet. Unlike others who only alter one dimension, we alter/modify four separate dimensions for a true NM Flash Suppressor | $65.00 |
| Modify Gas Cylinder to NM- This produces a unitized one-piece gas cylinder and front band assembly. We use the screw and glue method which locks the spindle valve in the open position | $80.00 |
| Adjust Trigger Pull- Produces a clean, crisp two-stage pull with a weight 4-3/4 (+/-) pounds | $50.00 |
| Glassbed wood or McMillan Fiberglass Stock | $235.00 |
| Additional for Bedding a Rear Lugged Receiver | $75.00 |
| Additional for Inletting a Stock for a Rear Lug | $50.00 |
| Install Tank's Steel Bedding Block into a McMillan Fiberglass Stock *Price includes Steel Bedding Block, prepping receiver recoil legs and glassbedding of Steel Bedding Block into customers McMillan Fiberglass Stock which has already been inletted with the Ft. Devon routing. This service is not available for Rear Lugged Receivers | $490.00 |
| Inlet McMillan Fiberglass Stock for Tank's Steel Bedding Block- This is for a stock that does not have the Ft. Devon routing | $225.00 |
| Install customers stock hardware onto a McMillan Fiberglass Stock | $65.00 |
| Install Tank's M14 Adapter Plate | $30.00 |
| Install Scope Mount | $35.00 |
| Inspection & Gauging- All critical dimensions are gauged to insure they meet MIL STD Specification | $65.00 |
Please note that prices listed are for labor only and do not include cost of parts or refinishing if any, unless specified.
| Install USGI Barrel | $95.00 |
| Install Criterion Barrel | $105.00 |
| Install Krieger Heavy Match Barrel | $125.00 |
| *Barrel installation includes inspection of receiver and bolt, install new barrel and headspace. Price does not include inletting of rear handguard for heavy match barrel. | |
| Fit Rear Handguard to Heavy Match Barrel | $85.00 |
| Glassbed wood stock- Includes modification and attachment of front handguard to lower band | $245.00 |
| Adjust Trigger Pull- Produces a clean, crisp two stage pull with a weight of 4-3/4 (+/-)pounds | $50.00 |
| Modify Gas Cylinder- Eliminates tension problems with the barrel and also contact problems with the front handguard | $70.00 |
| Replace worn Op Rod Piston Tip- Includes new piston tip and refinish | $140.00 |
| Recrown Barrel | $50.00 |
| Inspection & Gauging- All critical dimensions are gauged to insure they meet MIL STD specification | $65.00 |
We accept USGI rifles for work, all others please inquire.
Please note that prices listed are for labor only and do not include cost of parts or refinishing if any, unless specified.
| Install used USGI Barrel- Ability to properly headspace or overall suitability not guaranteed | $95.00 |
| Install New USGI or Criterion Barrel | $120.00 |
| Repair Gas Cylinder Threads | $25.00 |
| Tighten Trigger Group to Receiver | $25.00 |
| Tighten Fit of Barreled Receiver to Stock | $35.00 |
| Repair Hold Open Notch in Receiver | $25.00 |
| Inspection and Gauging | $50.00 |
| Assemble Parts Set to Customer's Receiver- Includes parts inspection, proper assembly and test fire for function and sight alignment | $225.00 |
Please note that prices listed are for labor only and do not include cost of parts or refinishing if any, unless specified.
| Install New Barrel | $80.00 |
| Thread Barrel for Flash Suppressor | $125.00 |
| Install Free Float Handguard | $65.00 |
| Install Gas Block or Flip Up Front Sight | $35.00 |
| Install Flash Suppressor or Muzzle Brake | $25.00 |
| Install Amby Selector Lever | $20.00 |
| Install Badger Tactical Latch | $20.00 |
| Install Magpul Enhanced Trigger Guard | $20.00 |
| Install JP Trigger/Hammer Set | $65.00 |
| Install Geissele Two-Stage Trigger | $35.00 |
Please note that prices listed are for labor only and do not include cost of parts or refinishing if any, unless specified.
| True Receiver Face and Lap Bolt/Receiver Locking Lugs | $120.00 |
| Blueprint Action- Consists of True Receiver Face, Chase Receiver Barrel Threads, Square Bolt Face, True Bolt Locking Lugs and Lap Bolt/Receiver Locking Lugs | $280.00 |
| Install Contoured Barrel Blank- Turn and Thread Barrel Shank, Chamber and Headspace, Cut and Crown to Length and Basic Surface Prep | $330.00 |
| Crown Barrel 11° | $80.00 |
| Thread Barrel Muzzle | $130.00 |
| Retap Receiver Scope Mount Screw Holes to 8x40 | $95.00 |
| Install Tactical Bolt Handle | $95.00 |
| Install Timney Trigger | $65.00 |
| Pillar Bed McMillan Fiberglass Stock | $250.00 |